Section 2: Connect Keyboard
In this section, we will configure Plover to detect and connect to your keyboard. Follow these steps to ensure your keyboard is properly recognized by Plover.
Step 1: Connect Your Keyboard to Your Computer
Before we begin, make sure your keyboard is connected to a USB port on your computer.
Step 2: Open Plover Configuration Settings
Open the Plover Application: Launch Plover by clicking on its icon in the Start menu or by typing "Plover" into the search bar and selecting the app from the search results.
Access Configuration Settings: In the Plover app, click on the Configure button.
Step 3: Navigate to the Machine Tab
Open the Configuration Window: A new popup window titled "Plover: Configuration" will appear.
Select the Machine Tab: Click on the Machine tab to view the settings related to your keyboard.
Step 4: Configure the Machine Settings
In this step, we will configure the settings to ensure Plover detects your keyboard correctly.
Set Machine Type: Look for the Machine option in the configuration window and ensure it is set to Gemini PR. (Refer to the image with red arrow labeled "1.")
Scan for Ports: Click the Scan/Refresh button to detect available ports. (Refer to the image with red arrow labeled "2.")
Select the Correct Port: From the dropdown menu, choose the port that your keyboard is connected to (e.g., COM4). (Refer to the image with red arrow labeled "3.")
Apply and Confirm Settings: Click Apply to save your settings, and then click OK to close the configuration window. (Refer to the image with red arrow labeled "4.")
Step 5: Enable Plover Output and Verify Connection
Enable Output: In the Plover main menu, ensure the Output option is set to Enabled. (Refer to the image with red arrow labeled "1.")
Refresh Connection: If your keyboard shows as "Disconnected," click the Refresh button to attempt reconnecting. (Refer to the image with red arrow labeled "2.")
Troubleshoot Connection: If the status still shows "Disconnected," you may need to select a different port. To do this, go to Configuration > Machine > Port and choose the correct port from the dropdown menu.
Example of Connected Keyboard:
© 2024 Stenoob LLC. All rights reserved.
Last updated